loading

52 結果發現: 用 Box Coaters

  • LEYBOLD HERAEUS 1250

    LEYBOLD HERAEUS: 1250

    Metallizer Specifications: Suitable for 100~400 um Film 60~600 N web tension 12 nos. ceramic boats 1 kW x 18 cartridge heaters Dimmer for crucible control 5 kg Spool Knurling roll for wire feeding 10-3 to 10-6 Torr high vacuum side 18" dia Unwind & Rewind 2 nos. water cooled Shielding for 6 evaporation boats 300 m/min Currently deinstalled ~1980 vintage.
  • LEYBOLD HERAEUS: AZ700Q

    EB-gun box coater Chamber: Stainless Steel Layer Measuring / Rate Control: Quarz Crystal & Optical Monitor OMD-8000 (new!). System is equiped with an intermittend direct monitoring on the substrate holder. EB-Gun: 6 (6kW), 1 / 2 or 4 Pocket Crucible HV Power Supply: 8 kW Substrate Heater: Quarz Heater below Glowing Device: 2000 V, 2 kW Ion source: End-Hall Ion source, D=10cm Thermal Evaporator: Boat Type 4 kVA, 6 V or 12 V Substrate Drive: Top Drive with Substrate Holders (Calotte) Vacuum system: Fore Pump: 1 x H&P TRP 90 (new!) Diffusion Pump: 1 x DI 3000 (Leybold) Baffle: Liquid Nitrogen Cold Trap: Option Vacuum Gauges: 2 x Pirani TTR90, 1 x Pfeifer IMR265 Flow Controller: 100 mln/min Water Manifold: Complette Manifold incl.Sensors Control System: LayOp Control System and Plant Visualisation for Multi-Layers 1988 vintage.
  • LEYBOLD HERAEUS A650 L2-K

    LEYBOLD HERAEUS: A650 L2-K

    Vacuum metallizer, 620 mm Capacitor grade Al: Zn. 2~15 um Polyester, 2~6 um PC film 420 mm roll dia. 7~70 N web tension 1.5 mm Al wire. 6 nos. 10x20x105 mm intermetallic composite boats 7.5 KVA/boat, 1~5 ohms/sq dep. thk. 1~2 ohms/sq at 4 m/s of PP Oil Masking system: up to 5 mm Bandwidth Cold trap Cryogenic pump 90,000 l/sec 5x10-3 mbar, R512 refrigerant, Chiller 18 kW each Pump, 25 TR Compressors 8 mtr/sec, 135 KVA 1988 vintage.
  • SATISLOH 900D

    SATISLOH: 900D

    Box coater BALZERS Oil diffusion pump EDWARDS E2M80 Rotary pump EDWARDS EH500 Roots pump Meissner trap pumped with POLYCOLD PFC1100ST TEMESCAL STIH270-2CK/2CKB Electron gun TEMESCAL Simba 2 high voltage power supply Satis e-gun crucible indexer TRC3460 (2) Thermal boat evaporators INFICON XTC/C Deposition controller with dual crystal head COMMONWEALTH SCIENTIFIC MKII Ion gun COMMONWEALTH SCIENTIFIC Power supply BALZERS RVG040 / RME010 Gas inlet control system BALZERS IMG300 Pressure measurement controller Rear surface heater Satis control system with ophthalmic processes Manuals.
  • SINGULUS / STANGL III

    SINGULUS / STANGL: III

    Metallizer system for CD/DVD.
  • LEYBOLD HERAEUS A700Q

    LEYBOLD HERAEUS: A700Q

    Sputtering system Includes: E-beam gun INFICON deposition controller Triple pump system Heater and all usual instruments associated with vacuum systems Primary Pump Turbo Pump New 750W Power Supply Optional: second flat door with 2 rotatable magnetrons 1992 vintage.
  • TEL MARK VZ

    TEL: MARK VZ

    Wafer edge exposure (WEE) system 2004 vintage.
  • SATISLOH: 900D

    Box coater.
  • SATISLOH SATIS 1200 DL

    SATISLOH: SATIS 1200 DL

    Box coater BALZERS Oil diffusion pump EDWARDS E2M175 Rotary pump EDWARDS EH1200 Roots pump Meissner trap pumped with dual output POLYCOLD PFC1100ST TEMESCAL STIH270 Electron gun TEMESCAL Simba 2 High voltage power supply (2) Thermal boat evaporators INFICON XTC/C Deposition controller with dual crystal head COMMONWEALTH SCIENTIFIC MK II Ion gun COMMONWEALTH SCIENTIFIC Power supply (Satis branded) BALZERS RVG040 / RME010 Gas inlet control system BALZERS IMG300 Pressure measurement controller Satis control system with processes Diffusion pump (1/s): 20000 Substrate holder diameter Θ: 1140 mm Standart dome diameter Θ: 318, 168, 156, 126, 120 Filp-over system diameter Θ: 252, 144, 120, 108, 96 Manuals 1997 vintage.
  • SINGULUS / STANGL III

    SINGULUS / STANGL: III

    Metallizer system for CD/DVD.
  • SATISLOH 725

    SATISLOH: 725

    Coating machine 1989 vintage.
  • SATISLOH SATIS

    SATISLOH: SATIS

    Optical coater Chamber, 47" Large pocket e-guns: Power supply Indexers Shutters / XY Sweep controllers Dual stage rotation KRI Ion source & power supplies Vacuum gauging IfC3 Thickness monitor Manual control panel Heater POLYCOLD / Diffusion pump and valves EDWARD Mechanical pump & blowers.
  • LEYBOLD HERAEUS 1650

    LEYBOLD HERAEUS: 1650

    Metallizer Max containers: 2 x 40 ft Standard configuration Process: Coating on polyester / OPP films Specifications: Suitable for 8~500 um film 60~600 N web tension 1000 mm dia Unwind & Rewind (15) boats (2) nos. water cooled Shielding for 7 & 8 evaporation boats 400 mm dia Coating drum 480 m/min 15 sec Decceleration time Elec. hoist. 1 cu.m./hr compressed air 15 cu.m./hr 20~25 C cooling water 380 KVA connected 8 m/sec Currently de-installed ~1988 vintage.
  • SINGULUS / STANGL III

    SINGULUS / STANGL: III

    Metallizer system for CD/DVD.
  • NARAE NANOTECH CUSTOM

    NARAE NANOTECH: CUSTOM

    R&D slot die coater, 4" Equipped with substrate thickness and coating gap sensors (3) Supply reservoirs: configured as dual ink supply plus rinse Main coater unit Control system Electrical cabinet Glove box feedthroughs (2) Dies, (1) spare Manuals included in electronic form Optional: 5-station VAC Atmosphere glove box 2013 vintage.
  • GCA: 1006

    Lithography trackers.
  • SATISLOH MC 260

    SATISLOH: MC 260

    Box coater (18) Lenses with flip over (2) Process: Standard hydrophobic Super hydrophobic Rotary pump: PFEIFFER UNO 30M High vac pump: PFEIFFER Turbomolecular pump 1600 Lenses heater: (2) IR lamps up to 150°C Deposition controller: Inficon XTC/C E-Beam gun: AIRCO TEMESCAL STIH270-1CK (6) Pockets High voltage power supply: AIRCO TEMESCAL Cv6S Ion source: COMMONWEALTH SCIENTIFIC Mark I Power supply: VEECO Mark I Controller Mass flow controller: O2 Automatic cycle Cycle time: Approx 1 hour Shields Lens holder rings Includes: Meissner trap Poly cold Power: 380 VAC, 3 phases, 16 kVA Max 1997 vintage.
  • SATISLOH 900D

    SATISLOH: 900D

    Box coater.
  • SATISLOH MC-360

    SATISLOH: MC-360

    Box coater PolyCold cooling system Laminar flow chamber Controllers CPU Certified T10 Power supplies Fan Auxiliary pump Turbo pump Needs to be replaced: Power supply: TEMESCAL CV-6S E-beam Ion source: VEECO Mark I controller Currently de-installed 2000 vintage.
顯示 每一頁
1 2 3 下一個