loading

246 結果發現: 用 Crystal Growing, Sawing & Slicing

  • MEYER BURGER: BS 810

    Band Saw Workpiece Length 700 mm Width 700 mm Height 700 mm Weight- max 1200 kg Total travel 900 mm Feedrate 0 - 100 mm/min Blade speed 0 - 3000 mm Pre-tension 5 - 35 kN Blade thickness 0.5 - 1.3 mm Blade width 25 - 100 mm Blade length 8550 mm.
  • APPLIED MATERIALS HCT

    APPLIED MATERIALS: HCT

    Ingot squarer Manuals included ~1991 vintage.
  • EBARA: CRYSTAL GROWING FURNACE

    Silica crystal growing furnace Elgar power supply (8) Sorenson power supplies (2) Ribbon feeders 0-25 V, 0-160 DC 2001 vintage.
  • DOALL 2013-V3

    DOALL: 2013-V3

    Vertical band saw, 20" Throat distance: 20" Work height capacity: 13" Band width capacity: 1/16" to 1" Speed range (variable): 30 to 5,500 FPM Size of tilting table: 26" x 26" Control box Table arm and feed bracket 3 HP motor and controls Work light and air hose 1997 vintage.
  • HCT HC SD400

    HCT: HC SD400

    Wire saws (4) Spindle tool capable of cutting 2 ingots Modified to run IC by adding temperature controls to minimize warp Cybelec controllers 12" Ingot holder not advisable for use with machine (3) Sets of wireguides System can run (2) ingots (4) Extra rollers included Backup system software: No Hydraulic pump: No Iincluded: Spare parts Missing part: Hydraulic pump 480 V, 3-Ph, 50/60 Hz Secondary voltage: 400 V, 3-Ph Secondary voltage: 172 V, 3-Ph Secondary voltage: 220 V, 1-Ph Secondary voltage: 120 V, 1-Ph Secondary voltage: 24 V Full load current: 150 amps Horsepower: 51.04 kw Largest motor ampereage: 49.0 at 400 V, 3-Ph Largest motor horsepower: 17.3 W Interrupting capacity: 65 ka at 480 V 1994 vintage.
  • DAI-ICHI KIDEN CUSTOM

    DAI-ICHI KIDEN: CUSTOM

    Systems Produces square silicon ingots Vacuum pumps.
  • STC: 16-22

    Inner diameter saw with large angle.
  • KAYEX / HAMCO CG 3000

    KAYEX / HAMCO: CG 3000

    Czochralski furnaces Control console Main transformer: 460V, 300A Water pump 1985 vintage.
  • GIGAMAT: GXG-10000

    Crystal growers.
  • MEYER BURGER DS 271

    MEYER BURGER: DS 271

    Wire saws Workplace dimensions: Cross section: Maximum 210 x 210mm (220mm) Workpieces: 2 x 510mm / 4 x 255mm Maximum loading length: 1020mm Minimum wafer thickness: 0.100mm (Depending on process parameter) Wire: Diameter: 0.100-0.160mm Speed: 15m/s Direction: Forward / Reverse cutting Bi-directional cycle: Programable (Forward / backward meters) Acceleration: 2m/s² Pre tension: 35N (Depend on wire diameter) Length: 640km for wire Θ 0.160mm 800km for wire Θ 0.120mm 1100km for wire Θ 0.120mm Wire snide rollers / wire web Diameter: 350mm Length: 1061mm Number: 2 Required power: 2 x 75kw Bearing application: Special roller bearing, water cooled Horizontal distance between axes: 660mm Wire web working height: 1515mm Wire web width: 1030mm (3) Wire deflection rollers: (2) Narrow Wide Diameter: 160mm Wire winder: Reel axis working height: 1160mm MC Reels: MB 500 Supplier reels: TA 100 / TA 180 Cutting feed: Speed: 0.01-10mm/min (Programmable) Rapid traverse: 200mm/min Working stroke: Maximum 270mm Slurry supply: Tank capacity: Maximum 4751 Slurry temperature: Preselectable from 20-27°C Pump delivery rate: Maximum 12000kg/h Density: Displayed Cooling: Heat exchanger (12-17°C, density 25°C 1.6kg/dm³ PEG 300/F600) Control system: PC with S7 (416 slot CPU, 317FCPU) Monitor / operating panel: 10.4" Flat panel touch screen Coloring: Machine frame: RAL 9007 Covers: Stainless steel Accentuation: RAL 5013 Control cabinet: RAL 7035 Noise level: Free field: <75dB(A) Electrical power: Configuration: TN-S without nutral wire Line voltage / frequency: 3 x 400V ±10% / (50Hz / 60Hz) Power fuse: 500A gG gl fast acting Clamp cross section: Maximum 240mm² Connection power: 190kw Maximum operating power: 165kw Averaging operating power: 105-135kw UPS System for PC: Integrated IP Protection class: IP 54 Connection network: RJ 45 Slurry tank: Tank capacity: Maximum 475 Filling / Draining connection: Kamlok coupling (633 FW DS 1") 2011 vintage.
  • NTC MBS1000C

    NTC: MBS1000C

    Crystal Growing, Sawing & Sawing Systems Includes: (2) Mainframes of MBX100C Electrical control box (transformers, power cores, etc.) Control panel Control box (PLC, etc.) Electric stacker and charger Lifting car Parts Main motor: (4) pieces Maximum Wire speed: 1,00m/min Maximum Wire up capacity: φ0.25mm x150km Cutting feed speed: 0.02~2.5m/min Slurry tank capacity: 400Lit Power supply in use: 200V± 10% .50Hz Power Consumpiton :102KAV (MAX 116KVA) Maximum workpiece dimension: φ165xH500x25 pieces (for 156)) φ210xH500x16 pieces (for 156) 890xH500x25 pieces (for 156) 1,060xH500x36 pieces (for 156) 2010 vintage.
  • XAOT: HDT-100

    Crystal growing pullers 2-Crystal process.
  • TAKATORI MWS 610

    TAKATORI: MWS 610

    Wire saw 1999 vintage.
  • CNC MACHINE / WUXI SJ: WS003

    Rolling mill 2-Roll process.
  • HCT 500 SD-B/5

    HCT: 500 SD-B/5

    Wire saw, 2008 vintage.
  • MEYER BURGER: DS 271

    Wire saw, 1020mm load length for 156 x 156 ingot Slicing yield for 190um ~99% Plant yield > 94%, with 120um kerf loss 2010 vintage.
  • STC: EP 5800

    Edge grinders.
  • MEYER BURGER DS 271

    MEYER BURGER: DS 271

    Wire saw Converted to DW process Diamond wire Mono Si for solar application 2013-2014 vintage.
  • MEYER BURGER DS 271

    MEYER BURGER: DS 271

    Diamond wire saws Specifications: Brick loading length (max): 40.16" Work piece dimension (max): 8.66" x 8.66" Work piece holders: 4 x 10.04" 3 x 13.39" 2 x 20.08" 1 x 40.16" Wire diameter: 0.0039" - 0.0063" Wire speed: 49 FPM Cutting media: Diamond wire (glycol or water based) Wire guide rolls diameter: 13.78" Workpiece dimensions: Cross-section: Max.210 × 210 mm (Ø 220 mm) Number of workpieces: 2 × 510 mm / 4 × 255 mm Max.loading length: 1020 mm Min.wafer thickness: 0.100 mm Wire: Diameter: 0.100 – 0.160 mm Length: up to 640 km for wire Ø 0.160 mm up to 800 km for wire Ø 0.140 mm up to 1100 km for wire Ø 0.120 mm Speed: Up to 15 m/s Direction: Forward or reverse cutting Bi-directional cycle: Programmable (in forward and backward meters) Acceleration: Up to 2 m/s2 Pre-tension: Up to 35 N (depending on wire diameter) Wire guide rollers / Wire web: Diameter: 350 mm Length: 1061 mm Weight: 175 kg Number: 2 Required power: 2 × 75 kW Bearing application: Special roller bearings, water-cooled Horizontal distance between axes: 660 mm Wire web working height: 1515 mm Wire web width: 1030 mm Wire deflection rollers: Number: (3) On each side (2 narrow, 1 wide) Diameter: 160 mm Wire winder: Reel axis working height: 1160 mm MC Reels: MB 500 Supplier reels: TA 100 and TA 180 Cutting feed: Speed: 0.01 – 10 mm/min, programmable Rapid traverse: 200 mm/min Working stroke: Max. 270 mm Slurry supply: Tank capacity: Maximum 475 l Slurry temperature: Preselectable: 20 – 27 °C Constant: +/- 1 °C Pump delivery rate: Max. 12,000 kg/h Measured and displayed with mass flow meter Slurry density: Displayed Slurry viscosity: Displayed Slurry cooling: Heat exchanger Cooling water inlet temperature: 12 – 17 °C Slurry density (25 °C): 1.62kg/dm3 PEG: 300/F600 Control system: Type: Siemens industrial: PC with integrated S7 control system 416 slot CPU; 317 FCPU Monitor / Pperating panel: 10.4“ flat panel touch-screen Coloring: Machine frame: RAL 9007 Covers: Stainless steel Accentuation: RAL 5013 Control cabinet: RAL 7035 Noise level: Noise level (free field): < 75 dB (A) Compressed air: Maximum particle diameter (class 4): 15 µm Maximum particle density (class 4): 8 mg/m3 Maximum residual oil content (class 4): 5 mg/m3 Maximum residual water content (class 4): 6 g/m3 Pressure dew point: +3 °C Minimum input pressure: 5.5-8 bar Average consumption: ~15 m3/h Additional consumption: ~24 m3/h Connection (interface): Ø13 mm hose fitting Air exhaust: Quantity: Max. 250 m3/h Connection (interface): PVC Pipe, internal Ø 126 mm Water: Water quality: Clean water pH value: 6.5 to 8.5 Total hardness: 6° to 8° dH Maximum particle size: 100 µm Water temperature at input: Constant 12 – 17 °C *) Maximum water requirement: 350 l/min Average water requirement: approx. 240 – 290 l/min Min/max. pressure: 2 to 5 bar Differential pressure of installation line: At least 2 bar during cutting Maximum cooling power (capacity): 135 kW Supply connection: G 2“(internal thread) Return connection: G 2“(internal thread) Ambient conditions: Ambient temperature: 5°C-25°C Temperature fluctuation: Max. 2 °C per cutting process Max. 1 °C over 1 hour Relative average air humidity: 50 % ± 10 % Structural requirements: Recommended foundation thickness: 200 mm Concrete quality: Strength category C 25/30 Differential setting: Max. 0.8 mm/m Ground evenness: ± 5 mm over 3m Minimal doorway dimension (transport): Height 2900 mm; width 2700 mm Storage and transport of the wire guide rollers: Ambient temperature for transport and storage: > 0°C Relative average air humidity: 50 % ± 10 % Electric power: Mains configuration: TN-S without neutral wire Line voltage / frequency: 3 × 400 V ±10 % / 50 Hz 3 × 480 V ±10 % / 60 Hz Power fuse: 500 A gG-gL fast acting Clamp cross section: Max. 240 mm2 Connection power: 190 kW Max operating power: 165 kW Average operating power: 105 - 135 kW UPS System for PC: Integrated IP Protection class (electrical cabinet, touch-screen): IP 54 Connection network (Ethernet): RJ 45 2011 vintage.
  • KALAMAZOO: 2012H

    Vertical band saw Size: 20".
顯示 每一頁
1 2 3 4 5 6 下一個