二手 DAGE 2400 PC #58694 待售
網址複製成功!
單擊可縮放
ID: 58694
Shear / Pull Tester
Power Requirements: 110-120 VAC @ 5 A, 220-240 VAC @ 3.15 A
Dage BT2400PC Application 1997
Windows 98
Fully configured tower style machine control computer
Supplied with a manually adjustable X-axis table.
This unit is a multi-function, semi-automatic test facility, offering extremely versatile destructive and non-destructive testing (NDT) or ball-bonds, and wire pull
Features:
Pentium motherboard installed versus standard EPROM board configuration
Windows 95 software interfaced to system hardware by motion control card
PC Monitor used versus typical LED-type display
Automatic Calibration and Linearity Checks
Advanced Load Cartridge Design
Mouse-driven operation for machine set-up, control and analysis operations
Floppy and hard drives include for introduction and storage of test configurations and results
Comprehensive range of analysis screens and test result files allow data analysis directly on the PC2400T. Information can be printed using standard Windows print options.
Results are automatically stored on the hard disk in CSV text file format and can be exported to floppy disk, RS232 port or directly to a factory mainframe via a network.
Quick release design ensures that change-over time between test functions is minimized
Applications include:
Ball shear
Aluminum wedge shear
Low force die shear
The system caters for these types of bond test using up to 5 kg force
Die shear using up to 100 kg force
Wire-pull testing using up to 10 kg force
Software/Configuration Versions:
Main Control: 2.39d
Motion Config: 2.3612
Motion Program: 2.381
Motion Board: D841 Issue 4
Cartridge included (Choice of one):
Model Number: 2400PC-BS5KG Ball Shear Cartridge for 5k grams
Model Number: 2400PC-WP100 Wire-Pull Cartridge for 100 grams
Specifications:
Z Axis Travel: 2.87"
Work Holder:
X Axis Travel: 1.0" manual adjustment, 0.9" motorized adjustment
Y Axis Travel: 0.9"
Maximum Test Force:
Z Axis: 10 kg
Y Axis: 100 kg
Minimum Detectable Load (From Software Version 2.20):
5% of currently selected test load range
(For destructive testing - 5% of the threshold parameter slider setting)
Work Area (Swing Round Tool): 8.5" minimum
Keypad: 4 x 4 matrix
Joystick: Self centering
Illumination: 20W Halogen lamp
Vacuum Base: 20" Hg minimum (supply to machine)
Sound Level:
Continuous A-weighted sound pressure at the workstation < 70 dB(A)
Die Shear Testing Specifications:
Measurement Accuracy: +/-0.5% of load cell rating
Test Mode: Destructive or Non-Destructive
Shear Mode: Automatic
Shear Direction: Y axis, front to back
Shear Tool (Standard): Tungsten carbide
Landing Speed (Programmable): 0 to 0.039" / s
Landing Force: 3g to 10g (depending on landing speed)
Shear Height:
Range: 0 to 0.019"
Resolution: 0.00025 mm
Accuracy (At Start of Test): +/-0.00025 mm
Accuracy (Though Test): +/-0.0005 mm
Shear Speed (Programmable Range): Cartridge dependent
Y Axis Travel During Shear Test: Cartridge dependent
Ball Shear Testing Specifications:
Measurement Accuracy: ±0.5% of load cell rating
Test Mode: Destructive or Non-Destructive
Shear Mode: Automatic
Shear Direction: Y axis, front to back
Shear Tool (Standard): Tungsten carbide
Landing Speed (Programmable): 0 to 0.039" / s
Landing Force: 3g to 10g (depending on landing speed)
Shear Height:
Range: 0 to 0.5 mm (0.019")
Resolution: 0.001 mm
Accuracy (At Start of Test): ±0.00025 mm
Accuracy (Through Test): ±0.0005 mm
Shear Speed (Programmable Range): Cartridge dependent
Y Axis Travel During Shear Test: Cartridge dependent
Pull Testing Specifications:
Measurement Accuracy: ±0.5% of load cell rating
Test Mode: Destructive or Non-Destructive
Pull Mode: Manual, Step back, or Autohook
Pull Direction: Z axis, vertical
Z Axis Stroke: 73 mm
Pull Tool (Standard): Hook or tweezer
Pull Speed (Programmable):
Range (up to 1kg rating): up to 5.0 mm/s
NDT Overshoot: 0.5% FSD.
DAGE 2400 PC是一種在半導體工業中廣泛使用的精密球楔接合器。它能夠進行精細的螺距和金屬絲楔形粘結,以及精確的熱壓焊接。該設備能夠生產各種粘結尺寸,最大導線尺寸為0.0025英寸(25 μ米)。它與銅和金鍵線兼容,允許使用任一材料。系統的電子設置可以輕松調整,允許用戶自定義鍵合時間和電流設置等參數。DAGE 2400PC還配備了Anti-Tilt Unit,以減少在粘合過程中導線失真的機會。這臺機器是為各種基材而設計的.它配備了接觸位置傳感器,以確保在線鍵過程中元件的最佳對準。為進一步提高精度,該工具配備了CCD攝像頭,可用於精確測量粘結並檢查其可靠性和質量。對於運營商來說,2400 PC功能主要通過觸摸屏顯示。這允許用戶輕松訪問各種選項,包括調整程序設置、查看綁定參數和有關組件的信息以及操作綁定器。2400PC還包括一個警報資產,它可以在發生綁定錯誤時向用戶發出警報。這樣就可以采取糾正措施,防止進一步中斷操作。還包括自動卡盤模型,該模型可自動提取、定位和彈出元件。這樣可以縮短循環時間,提高粘合器的整體輸出。DAGE 2400 PC是一款可靠、通用、精確的粘合器。它可以用於各種各樣的任務,並且能夠產生可靠和一致的結果。其易用性和定制設置的能力使其成為半導體生產的絕佳選擇。
還沒有評論