二手 HODGE 2116 #179900 待售
網址複製成功!
ID: 179900
Autoclave
60” ID x 12ft Long Autoclave Vessel
48” ID x 8ft Long Work Area
Maximum Design Pressure: 100 PSIG
Pressure Rate: 0-10 PSI/Minute Average
Depressurization Rate: 0-10 PSI/ Min. Average based on load
Pressure Control Accuracy: +/- 1 PSI
Pressure components:
Inlet and Exhaust Valve
Pressure Transducer
Monitoring and Data Acquisition
Temperature:
Maximum Design Temperature: 500°F
Heating Rate: 0-10°F/Min based on air temperature and autoclave load
Cooling Rate: 10°F/Min based on average air temperature and autoclave load from maximum working temperature to 150°F
Customer must have cool water
Temperature Control Accuracy and Uniformity: +/- 5°
Door accessories:
Door Safety Limit Switch
Door Seal
Hydraulically Operated
Insulation Liner and 3” of Insulation
Insulation:
The interior of the autoclave will be insulated with 3” of high temp insulation
The insulation will then be covered by aluminized sheet metal
All exposed surfaces will be painted with industrial enamel
The autoclave will meet OSHA hot surface guidelines
Exterior:
Painted with heat and corrosion resistant primer and paint
Temperature Monitoring Devices:
(12) Thermocouples included
Cooling System:
Modular cooling coil located in front of electric coil
Cooling water supplied by others
Requires cooling water equivalent to a 21 ton cooling tower to achieve 6 Deg. F. per minute cool down
Cooling tower available
Vacuum System:
Vacuum manifold included
Vacuum Pump included
(5) Vacuum lines included
Chamber Pressure:
Chamber Pressure controls for air or nitrogen with data collection included.
Compressed nitrogen provided by others
Controls:
Windows based Industrial PC Programmable Control System using Phoenix Logic Ethernet for autoclave with the following features: (with no manual overrides)
Control heating ambient – 450 Deg. F. at 0-10 Deg/Min F. Loaded based on 1,000 lb. of steel tooling and 1,000 lb composite product load.
Run at precise temperature ambient – 450 Deg. F. for programmed time period
Total automatic control of cycle sequences from beginning to end
Operator controls for locking door. 1.5 PSI Door Interlock
Process complete and ready to open door indicator lights
Temperature and Pressure safety back ups
Full program editing and storage capabilities
Remote monitoring of the system is available by Ethernet Connection
Thermocouples quoted separately
Vacuum Lines quoted separately
Tracks:
Track support and angle iron tracks provided. The tracks will be able to handle the customer supplied cart
Cart is available at an additional cost
Valves:
Safety relief
One Pressure transducer for controlling pressure
Pressure switch for high pressure alarm
Safety:
Man in cave safety switch
Optional:
Vacuum Line with:
Two motorized ball valves
Transducer with data collection
Manual ball valve
Pressure gauge
Three way ball valve for transducer calibration
Optional:
Thermocouple jacks with data acquisition
2 HP vacuum pump
25 Ton cooling tower with controls, pump storage and storage tank.
HODGE 2116是一個環境室,專門設計用於測試各種材料在不同氣候下的耐久性和反應。該實驗室設備用於精確模擬封閉區域內的變化溫度、相對濕度和氣壓。腔室的溫度範圍為-60°C至+150°C,溫度均勻度± 0.5°C,溫度均勻度穩定性為0.2°C。其相對濕度範圍從0到95%不等。該裝置使用蒸發傳熱來控制溫度和濕度。其專利設計有一個帶有特殊過濾器的排氣系統,使室內產生的大氣以及室外的環境不受影響。此外,該腔室還配備了數字控制器,可以讓用戶設定精確的條件,便於管理腔室內部的環境設置。2116提供了一個可編程計時器,允許在廣泛的溫度和濕度水平上進行長期測試。該室還擁有兩個用於測量溫度的熱電偶,一個在控制櫃中,一個在調節櫃中,提供實時溫度讀數。此外,腔室的頂級智能控制器允許精確和可重復的測試設置,確保測試條件保持一致和可靠。HODGE 2116堅固的結構和車架設計最大的剛性和耐用性,采用不銹鋼內墻,能承受惡劣的條件,持續更長的測試時間。該室的獨一無二的精密密封系統提供防漏防塵絕緣。此環境室可降低噪聲水平並提供最佳冷卻效果,非常適合需要近乎靜音操作的應用。此外,2116的設計采用了緊湊和可運輸的外形規格,使其能夠適應任何標準的實驗室空間,並便於實驗室之間的移動。通過易於使用的控制,腔室使故障排除和維護變得容易和高效。總而言之,HODGE 2116環境室是一種專門設計的儀器,經過專業設計,考慮到耐用性和精確度,非常適合各種材料測試應用。
還沒有評論