二手 TEMPTRONIC TPO 4300A-8C32-4 #9196221 待售

ID: 9196221
優質的: 2007
Temperature source system RS232, IEEE, 10/100 Ethernet interface Temperature range: Standard head with arm or 2.4 m (8 ft) hose: -80° to +225°C (60 Hz system) -75° to +225°C (50 Hz system)³ Standard head, no arm with 1.2 m (4 ft) hose: -80° to +225°C (60 Hz system) -75° to +225°C (50 Hz system)³ Typical temperature transition rate (air): -55° to + 125°C: Approx. <5 seconds² 125° to -55°C: Approx. <13 seconds² System air flow output: 2.4 l/s to 9 l/s (5 to 18 scfm) Temperature accuracy: 1.0°C (When calibrated against NIST transfer standard) Temperature set, display and resolution: ± 0.1 Temperature Control: DUT Sensor ports: Internal diode Type T Type K thermocouple 100 ohm Platinum RTD DUT Control: Control to within ± 0.1° C Remote interface ports: IEEE-488, RS232C Serial Start test/end of test/stop on First Fail (ST/ET/SFF) Ethernet Features: (2) Modes of operation: Operator mode Cycling mode Purge flow capacity: 0.25 to 1.5 liters per second (0.5 to 3 scfm) airflow Manually adjustable Thermal head raising and lowering: Pneumatic control on thermal head Operated manually or via remote interface Head positioner movement: Manual locking (4 locks) 360° Head rotation Manipulator (arm) movement: Motorized raising and lowering of arm 330° Positioning range around the base unit Environmental and service features: Over temperature protection: + 235°C (Factory-set) Mobility: (4) Swivel caster wheels with locks (10.16 cm (4-inch) diameter) Rear handle for ease of transport Refrigerants: 50 Hz systems: HCFC-free and CFC-free, non-toxic, non-flammable 60 Hz systems: CFC-free, non-toxic, non-flammable Noise level: <65 dBA approximately Facility requirements: Power requirements: 200-240 VAC (230V nominal) 50 Hz, 30 Amp, 1 Phase 200-240 VAC (230V nominal) 60 Hz, 30 Amp, 1 Phase Compressed air requirements: Clean, dry air: Filtered to 5 micron particulate contamination Oil content: <0.01 ppm by weight filtered to .01 micron oil contaminant Dewpoint: <10°C @ 6.2 BAR (90PSI) Supply pressure: 6.2 to 7.6 BAR (90 to 110 PSIG) Supply flow at minimum: 7.2 l/s to 14.3 l/s (9 to 30 scfm) Supply pressure: Nominal 25 scfm Air supply temperature: +20° to +25°C (+22°C nominal) Operating temperature: +20° to +28°C (+23°C nominal) Humidity: 0 to 60% (45% nominal) 2007 vintage.
TEMPTRONIC TPO 4300A-8C32-4是現有的最好、最可靠的最終測試系統之一。它配備了4插槽數據采集模塊(DAM)和8-Channel溫度測試設備,使其成為一個高效且功能強大的系統。TEMPTRONIC TPO4300A-8C32-4 Unit具有堅固耐用的鋁制底盤,溫度範圍為+25°C至+85°C。該測試機是為最終測試應用的最佳性能而設計的。TPO 4300A-8C32-4中的8-Channel測試工具可同時測試多達8個組件。它有一個集成的電壓調節器,可以讓靜態測試快速準確地完成。TPO4300A-8C32-4具有強大的性能驅動功能,可實現最佳流程和生產力。為確保精確測量,該設備配備了用於雙區域熱分析的8通道測試儀資產、特殊工藝計時器和數據采集模塊。這有助於確定溫度漂移速率並提供溫度穩定性控制。Labview軟件提供了一個開放平臺,可快速開發完整的測試解決方案。它包括一個交互式圖形程序,允許用戶快速制定可定制的測試計劃。該軟件還集成了模型診斷和文檔工具。此外,該軟件還包含一個直觀的診斷軟件包,可輕松導航和識別潛在的測試問題。TEMPTRONIC TPO 4300A-8C32-4還具有集成的數字存儲示波器。這樣可以捕獲最多50MHz個波形,最大采樣率為10MS/s。此外,它還可以測量電流、電壓和溫度。TEMPTRONIC TPO4300A-8C32-4單元的通信功能包括以太網、USB、GPIB和RS 232輸入。以太網連接允許遠程監視運動、溫度和設備警報。USB連接使用戶能夠將數據直接從「破爛」傳輸到PC,而Gpib連接允許與GPIB總線集成。RS 232連接用於TEMPTRONIC與外部設備之間的通信。TPO 4300A-8C32-4還具有最大耐用性,並有2年保修作為後盾。該系統是高精度最終測試和熱分析應用的理想解決方案。可用於電信、汽車、電子等行業。TPO4300A-8C32-4擁有強大的硬件和先進的軟件,是最佳的最終測試系統之一。
還沒有評論