二手 TEMPTRONIC TPO 4300B-3X32-3 #9164929 待售

Temperature forcing system 200-240VAC 50HZ Temperature performance and air flow capacity: Temperature range: -75°C to +225°C (50 Hz System) Air supply: 15-30 SCFM Typical temperature transition rate (air): -55° to +125°C: Approx 10 seconds or less 2 +125° to -55°C: Approx 10 seconds or less 2 System air flow output: 2.4 I/s to 9 I/s (5 to 18 scfm) Temperature accuracy: 1.0°C Temperature display and resolution: ± O.1°C Temperature control: DUT Sensor ports: Internal diode Type T Type K thermocouple 100 ohm Platinum RTD DUT Control: ± 0.1°C Interface ports: IEEE-488 RS232C Serial Start test / End of test / Stop on ST/ET/SFF Ethernet Modes of operation: Operator mode Cycling mode Ramp / Soak / Cycle On-screen: Includes: Cycling modes / Operator modes DUT Temperature control: Patented dual loop Purge flow tester interface protection: Dry air purge protects tester electronics Purge flow capacity: 0.25 to 1.5 liters per second (0.5 to 3 scfm) Airflows and DUT types: Automated / Simplified / Accurate Range of motion: Turret assembly: Rotates 360° Environmental and service: Over temperature protection: +235°C Mobility: (4) Swivel caster wheels with locks Diameter: 10.16 cm (4-inch) Refrigerants: HCFC / CFC Non-Toxic Non-Flammable Noise level: <65 dBA Options: Turret assembly Flexible extender air transfer hose Adapter kit Facility requirements: Power requirements: 200-250 VAC (230 V nominal) 50 Hz, 30 Amp, 1 phase 200-250 VAC (230 V nominal) 60 Hz, 30 Amp, 1 Phase Compressed air requirements: Clean, dry Air: Filtered to 5 micron particulate contamination Oil content: <0.01 ppm by weight filtered to .01 micron Dew point: <10°C @ 6.2 BAR (90 PSI) Supply pressure: 6.2 to 7.6 BAR (90 to 110 PSIG) Supply flow at minimum: 7.2 l/s to 14.3 l/s (15 to 30 scfm) Supply pressure: Nominal 25 scfm Air supply temperature: +20°C to +25°C (+22°C nominal) Operating temperature: +20°C to +28°C (+23°C nominal) Humidity: 0 to 60% (45% nominal) CE Marked 2006 vintage.