二手 THERMONICS T-2420SX7-85 #9152009 待售
網址複製成功!
單擊可縮放
ID: 9152009
THERMONICS T-2420SX7-85 Temperature forcing system
Voltage: 208-230 Volts
Frequency: 50/60 Hertz
Phase: 1
Current: 20 Amps
Method of Cooling: Forced air with single-stage mechanical refrigeration
Multistage self-cooling heat exchanger
Method of heating: Forced air with in-line air heaters
Operator interface: Twenty character alphanumeric display and keypad
Menu-driven software with self-diagnostics
Controls: Microprocessor control of all critical functions
Ambient temperature range:
Operating: 15°C to 28°C
Non-Operating: -40°C to +85°C
Relative humidity: 20 to 65%
Pressure:80-110 PSIG (5.7 to 7.8 Kg/cm2)
Flow rate: 10-16 SCFM (4.7-7.6 liters/sec)
Dew point: Less than 10C at 80 PSIG (5.7Kg/cm2)
Quality: Clean, dry air, free of oil, moisture and particles
Calibration: Automatic or manual
Up to 10 different applications may be calibrated independently
Stored in non-volatile memory
Temperature Sensor: Device under test (DUT)
K-type thermocouple Optional
T-type thermocouple
1000 ohm RTD for auto calibration
Controller: Microprocessor-based PID (Proportional, Integral, Differential) with
user control of DUT mass constant
Fail safes: Snap disc thermostats, air flow sensors and thermocouples
Over temperature limit of 235°C
Air dryer: Dries air to -70°C dew point
Air flow: 200 to 960 SCFH (1.6 to 7.6 liters/sec).
THERMONICS T-2420SX7-85最終測試設備旨在測試和分析各種電子元件。該系統由固態溫度控制器與多通道電源開關單元組合而成,允許對被測設備進行精確的熱控制。該機組固態溫度控制器的溫度範圍為-40 °C至+85°C(-40 °F至+185°F),精度為+/-0.1°C。它配備了七個獨立調節的通道,每個通道的最大輸出功率為4.3kW。這種先進的熱控制器還提供自動調整、微調、自動校準、過載保護、溫度傾斜和報警報告。多通道電源開關單元用於對被測設備施加熱應力。它有八個獨立的產出,最多可提供130A的電流。機器還提供手動和自動控制電源開關,允許用戶定制測試協議。T-2420SX7-85專為超高速測試和生產環境而設計。它支持廣泛的設備被測試規範,包括SOA、COP、燒結和高電流測試。該工具還附帶了用於同時記錄測試數據的數據記錄軟件。THERMONICS T-2420SX7-85最終測試資產在測試和分析電子元器件時提供了精確和精確的性能。其綜合特性使其成為任何測試和生產環境的理想選擇。
還沒有評論