二手 GE PG6561B #155323 待售
網址複製成功!
單擊可縮放
ID: 155323
優質的: 1999
Cogeneration plant, 40 MW
Rated: 47,400 KVA, 13.8 KV
Power factor: .85
Hours: 7,400
Natural gas fuel
Multi-stage axial flow compressor
Compressor speed: 5,133 RPM
Modulated inlet guide vanes
(10) Chamber combustion system
On base natural gas combustion system with DLN combustors
Ignition system with spark plugs and UV flame detectors
Borescope openings for maintenance inspection
Vibration sensors seismic type for protection
Thermocouples on bearing drains
Inlet and exhaust plenums
Fire detcion by thermic detctors
Gas leak detection
Off-line compressor wet washing system
Auxiliary gearbox, flexible gear (oil filled) auxiliary coupling
Lubricating oil system:
Duplex oil filters
Single oil to water heat exchanger
Shaft driven main oil pump
Full flow AC motor driven auxiliary pump
Safe shutdown flow DC motor driven emergency oil pump
Oil reservoir
Starting and cool down system:
440V AC motor
Hydraulic torque converter
DC electro-hydraulic rotor turning device
Hydraulic oil system with:
Shaft driven hydraulic oil pump
Gas fuel system:
Combined stop and speed ratio control valve assembly
Gauges board panel
Generator compartment
Gas turbine generator control equipment:
SPEEDTRONIC Mark V turbine control panel
SPEEDTRONIC Mark V operator interface panel
Generator control and protection panel
Generator excitation and regulation panel
Unit AC/DC motor control center
Unit AC/DC subdistribution panel
125V DC unit battery with one (1) battery charger
Unit fire detection and protection panel
Marshalling panel
Off-base unit mechanical auxiliaries:
Inlet air system
Vertical exhaust system
Gas fuel off-base system
Distillate off-base system
Off-base cooling loop for gas turbine and generator cooling system
Fire protection for gas turbine generator
Oil mist eliminator with single extraction fan
Gas compartment ventilation unit
Includes:
Gas turbine generator
VOGT HRSG
Turbine control system and auxiliaries
Drawings, manuals and tools
60 Hz, 3 phase
1999 vintage.
GE PG6561B是一種機床,設計用於加工復雜的部件,特別是用於航空航天應用。該機專為高速操作而設計,能夠加工直徑達250毫米的部件,零件長度為250至406毫米。這允許工具用於各種零件幾何和設計。該機由兩個主軸組成,每個主軸都配有高速機電驅動系統。每個主軸都配有高精度的直驅電動機,以提高精度和剛度。傳動系統與一系列高精度球桿齊頭並進,既提供精確的線性運動,又提供精確的角度運動。該機器由鋼基和功能齊全的控制面板構成,提供所有操作和編程功能。控制面板包括在手動操作和自動操作之間切換的功能,並具有一系列操作設置,以提供對加工任務的幾乎全部控制。該機還包括一個冷卻器/冷卻器單元,以確保切削刀具或材料在操作過程中的高效冷卻。機器上的主軸轉速從12,000到37,000 RPM不等,而快速移動速度達到18M/min。此外,該機能夠進行剛性攻擊和輪廓化作業,並能夠程式化進步的鉆探作業和偵測障礙物。此外,PG6561B能夠利用刀具路徑優化。該機提供刀具路徑優化輔助,以獲得最佳曲面質量,從而在不犧牲精度的情況下創建平滑、精確的曲面。為此,可以調整一系列參數以接近每個加工過程的最佳解。GE PG6561B由於其開放式體系結構和模塊化設計而易於維護和維護。機器與冷卻劑、潤滑劑和專用機液兼容,意味著用戶可以根據正在加工的材料和零件的形狀來調整機器的設置,機器還兼容一系列額外的部件,包括靜態刀架、冷卻劑系統和壓力調節器。總體而言,PG6561B是一種先進的機床,專為任何尺寸和幾何形狀的元件進行高精度和高速加工而設計。該機器具有優化刀具路徑的能力、與一系列流體的兼容性以及開放的體系結構,使其成為航空航天和其他需要高精度應用的理想解決方案。
還沒有評論