二手 MATSUURA VX-1000 #9121999 待售

Vertical machining center Traverses "X" axis travel: 40.15" / 1,020mm "Y" axis travel: 24.01" / 610mm "Z" axis travel: 24.01" / 610mm Table surface to spindle end: 3.93” – 27.95” / 100 – 710mm Table center to column guideway: 15.35” – 39.37” / 390 – 1,000mm Spindle center to column guideway: 27.36” / 695mm Table: Table work area: 47.24” x 27.55" / 1,200mm x 600mm Maximum weight on table: 1,100 lbs / 500 kg T Slot (width x number x pitch): 0.7” x 5 x 3.93” / 18mm x 5 x 100mm Spindle: Spindle speed range: 40-15,000 rpm Spindle drive: S5 Direct Drive System Spindle taper (7/24): (7/24) #40 (“BIG PLUS” Tooling System) Spindle diameter: 3.15" 80mm Maximum spindle torque (@ 1,400 RPM): 77 ft.lbs / 150 N-m Tool clamping force: 12 kN Spindle Lubrication: Grease Spindle Motor (cont./30min/15min): AC 15/18.5/22 kW 20/25/30 hp Feedrate: Rapid traverse rate (X/Y & Z): 1,574 / 1,417.32 ipm / 40 / 36 M per min Feedrate: (X/Y/Z) 0.1 – 787.4” / 1 – 20 M / min Jog Feedrate, Door Open: 78.74 ipm 2 M / min; Door Closed 25% 50% 100% of feedrate Minimum Command: 0.0001” / 0.001mm Automatic Tool Changer: Type of tool shank: JIS B 6339 40T Type of retention knob: JIS B 6339 Pullstud 40P Tool storage capacity: 30 Tools Max tool diameter (if adjacent pockets full): 2.99" / 76 mm Max tool diameter (if adjacent pockets empty): 4.92" / 125 mm Max. tool length: 11.02" / 280 mm Max. tool weight: 15.4 lbs 7 Kg Tool pocket pitch: 3" / 76.2 mm Tool change arm: double grip type Tool selection: random Bi-directional 2014 vintage.