二手 ASM IDEALmold R2R #9366920 待售

Auto molding systems Type: Electro mechanical low ram movement With 4-mechanical points Frequency: 50-60 Hz Phase: 3 Phase, 4-Wire Average power: 10 kW Peak power:18 kW Air consumption: 500 l/min Air pressure: 5 to 7 Bar Vacuum capacity: 2.2 kW Operating condition: Operating temperature: 0 to 40°C Operating Humidity (RH): < 80% Mains voltage: 480 / 440 / 415 / 380 / 220 / 208 VAC Press: Force misalignment 4-Columns: < ± 5 % (Mean value) Clamping force repeatability: < ± 1 % FS Clamping force absolute accuracy: ±1 Metric tons ( test report ) Soft clamp capability: 155 x 50 x 0.1 mm Lower platen full stroke:176 mm ( including 6mm ejection ) Daylight: 646 mm Minimum mold closing and lock time:1.4 sec (5-165 stroke) Minimum mold opening time: 1.4 sec (5-165 stroke) Low speed closing: 1 mm/sec Low speed opening: 1 mm/sec Position repeatability: ± 0.1 mm Parallelism of mold platen: < ± 0.05 mm Straightness of mold platen: < ± 0.03 mm Deformation of mold platen: < 0.0254 mm / 305 mm span Feedback method: Incremental encoder on motor AXIS Transfer: Transfer force: 3 Metric tons (Max) Transfer force accuracy: ± 50 kg Transfer force repeatability: < ± 1 % F.S Transfer operating stroke: 85 mm Position repeatability: ± 0.05 mm Operating speed: 0~15 mm / sec with 10 step control Speed accuracy: ± 0.25 mm / sec Position sensor control incremental encoder Force detector control load cell sensing device Ejector: Ejector force: 2 Metric tons Ejector operating stroke: 3.25 ± 0.05 mm Protruding height difference: < ± 0.05 mm Maximum ejector stroke mold protection: 3.8 mm Control: Control box: EMC Type Power supply Main: AC 200 / 220 V ± 10 %, 50/60 Hz, 3 phase Control: AC 200 / 220 ± 10 %, 50/60 Hz, Single phase Interface: Molding data / Monitor data: RS-422C Input signal: Direct input (ASM to SHI) DC24V, (24) ports Output signal: Direct output (SHI to ASM) DC24V, (16) ports Miscellaneous: Acoustics noise level: < 80 dBA Life time: > 2 x 106 Cycles 2007 vintage.