二手 ZEVATECH / JUKI KE 750L #9071801 待售

Pick and place machine Power Requirements 208,220,240 VAC, single phase, 50/60 Hz, 3 KVA Compressed Air Pressure: 5kgf/cm² (71 psi) Flow: 150Nl/min (5.3 cfm) Environmental Conditions: 10° to 35°C (50° to 95°F) operating. 50% (35°C) 90% (20°C) relative humidity, non-condensing Noise: 80dB or less System control: Computer: Embedded 32 bit PC with 540 MB hard disk drive 3 1/2” Floppy Disc Drive Color LCD Monitor, Keyboard with optional trackball. Operating System: MS-Dos 6.20 Programming: Menu-guided entry of feeder data, placement data, production data, System test, auxiliary operations through Graphical User Interface (GUI), on-line at the machine, Interactive Multi-Window System, Optional automatic program generation from CAD or Gerber Data Programming Methods On-Line: Teach with placement head, teach camera. Keyboard entry Off-Line: Keyboard entry Program Size: Maximum 2,000 placements per circuit. Maximum 100 non-matrix or 400 matrix circuits per PCB. Data Entry Resolution: X/Y axis 0.004 (0.01mm), Theta axis (rotation): 0.05° Up and Down Line connection: SMEMA Standard Teach Camera Accessories: Auto tool changer: up to (18) vacuum nozzles Placement: Placement Heads: (3) high speed assembly heads closed-loop twin AC servo motors and magnetic linear encoders Component Centering: Non-Contact TouchLess Centering (TLC®) using LaserAlign™ Sensor. Component Detection: Vacuum Sensor and Laser. Placement Accuracy: LaserAlign™: +/- 0.003” (0.09mm) for QFP +/- 0.0039” (0.1mm) for chips Placement Angle: 360º in 0.05º increments Placement Rate: 0.25 sec./component (throughput will depend on PCB size and component mix) Component specifications: Lead Pitch Minimum: 0.025” (0.65mm) Component Packaging: Tape, Tray, and Stick (For bulk components contact factory for availability) Number of Feeder: Inputs Up to (80) depending on Feeder Mix Options: Feeder float detector Host line computer (HLC) IC Collection belt High-speed matrix tray changer External programming unit (EPU) Bad mark sensor Feeder trolley Component verification Height measurement sensor Tape cutter Rear side monitor Multi-tray holder Area sensor 1998-1999 vintage.