二手 HUETTINGER TruPlasma RF 1003 #9114482 待售

HUETTINGER TruPlasma RF 1003
ID: 9114482
High frequency power supply 13.56 MHz RF Output: Full rated power into 50 Ohm 3000 W Nominal power range 10 - 3000 W Selectable power range 1 - 3000 W Output power (incident) at VSWR 1.1: 1 100 % of full rated power Output power (incident) at VSWR 1.5: 1 95 % of full rated power Output power (incident) at VSWR 2: 1 66 % of full rated power Output power (incident) at VSWR 3: 1 50 % of full rated power Output power (incident) at infinite VSWR >= 20 % of full rated power Reflected power limit 600 W Operating frequency 13.56 MHz ± 0.005 % Nominal load impedance 50 Ohm Harmonic signals at full rated output power into 50 Ohm non-reactive load: < -40 dBc Spurious signals at full rated output power into 50 Ohm non-reactive load: < -50 dBc Connector 7/16 female RF Out accuracy CW for digital control: Power measurement (Compatibility with other frequencies) Power detection (Forward and reflected) <= -26 dB at frequencies above 27.0 MHz, <= -26 dB at frequencies below 7.0 MHz Power accuracy into 50 Ohm (typ.) ± 0.8 W or ± 1 % of set point Fluctuation (Short term stability within 60 s observation time) into 50 Ohm at 1000 W (typ.) ± 1 W Drift (long term stability during continuous 30 minutes of operation) into 50 Ohm at 1000 W (typ.) ± 1 W Power repeatability into 50 Ohm for same generator (typ.) ± 0.8 W or ± 0.8 % of set point Power repeatability into 50 Ohm generator to generator (typ.) ± 0.8 W or ± 1 % of set point Power rise time for 10 to 90 % of full power < 50 ms Power rise time for delta 200 W < 10 ms Turn off time (RF off) from 100 % to 1% of full power: 10 μs Overshoot < 2 % of set point Set point response time from end of command to 90 % of set point: < 100 ms, < 15 ms (typ.) Boot time < 5 s Relative phase shift (between clock input and RF output): 0 – 360° Phase shift resolution 0.1° Pulse frequency: 10 Hz to 50 kHz Duty cycle: 1 to 99 % Min. pulse on time: 10 μs Min. pulse off time: 10 μs Pulse rise time: < 1 μs Pulse fall time: < 1 μs Power overshoot: < 10 % Power: 200 / 208 VAC ± 10 %, 3 Phase and ground, 50/60 Hz Auto frequency tuning (13.56 MHz ±.05 %) Arc management, Dnet 3kW, 13.56MHz Ultra-wide mains 200-480VAC 3-Phase, 10Hz - 50 kHz Pulse mode HN Connection, RS-232/RS-485.
HUETTINGER TruPlasma RF 1003是為等離子體應用而設計的高度可靠、高性能的射頻電源。該電源采用高效電路設計,可提供高達1000W的功率輸出。這是焊接、塑料焊接、激光蝕刻等應用的完美電源。TruPlasma RF 1003是一種變頻電源,可在0.1MHz和30MHz之間進行調節,頻率精度為+/-10kHz。它具有200-240VAC的高輸入電壓範圍,可以接受高達400V的峰值輸入電壓。該電源具有良好的+/-10V電壓調節和+/-2.5A電流調節。HUETTINGER TruPlasma RF 1003內置數字顯示屏,具有可調功率級別,可幫助您獲得所需的精確輸出。數字顯示屏還允許您輕松調整頻率和其他設置,而無需打開電源。TruPlasma RF 1003內置了多項安全功能,如過壓保護、過流保護,以及在電源開始過熱時立即關閉電源的恒溫器。此外,此電源還利用動態負載調節系統,即使負載發生變化,也能保持輸出功率穩定。HUETTINGER TruPlasma RF 1003還附帶了包括RS 232、RS485和Profinet在內的多種接口選項。這使您可以更好地控制電源,並有助於確保您擁有應用程序所需的輸出。總體而言,TruPlasma RF 1003是一款功能強大且可靠的電源,非常適合等離子體應用。高功率輸出、變頻、出色的電壓和電流調節、安全特性以及各種接口使其成為尋求可靠、高品質性能者的理想解決方案。
還沒有評論